Wir lernen Ihre Sprache noch!
Wir arbeiten fieberhaft daran, alle Seiten auf milestonesys.com in so vielen Sprachen wie möglich verfügbar zu machen. Aber dieser Prozess braucht Zeit. Während alle unsere Funktionen mehrsprachig sind. Einige Seiten, wie diese hier, sind noch nicht in Ihrer Landessprache verfügbar.
Vielen Dank für Ihr Verständnis!
2N® IP INTERCOM AND XPROTECT INTEGRATION
Live audio and video streaming from 2N IP Intercoms to XProtect® Smart Client.
Aktualisiert am Dienstag, 21. November 2023
Enhanced security – one unified interface! Let users stream video feeds from the 2N IP intercom, communicate with visitors, and control door locks, all from one place. 2N IP Intercoms can also trigger an alarm in XProtect® Smart Client upon a predefined action.
What is needed
Von 2N Telekomunikace
-
2N IP Intercom
-
License: Gold for RTSP streaming and ONVIF
Firmware 2.39
Optional License: Gold for Automation function
Optional License: Gold for Automation function
Von Milestone Systems
-
Milestone XProtect
XProtect® 2022 R3 and higher
Overview
How it works
How to install
Overview
2N® IP INTERCOM AND XPROTECT INTEGRATION - Live audio and video streaming from 2N IP Intercoms to XProtect® Smart Client.
Once you add the intercom to the XProtect® system, its camera, speaker, microphone, and outputs are automatically mapped to XProtect®. Compatibility between 2N IP intercoms and Milestone XProtect guarantees the ONVIF protocol is met and enables RTSP streaming.HOW CAN YOU BENEFIT FROM THE INTEGRATION?
Security operators can monitor video from the intercom alongside videos from other IP cameras, and they can even control doors remotely from the XProtect® system. Security is increased hugely as operators can immediately see who is at the door, speak with them, and, if necessary, begin recording, zoom in on the scene, or switch between individual cameras to follow the movement of selected people.
2N Intercoms also offer the possibility to trigger the virtual ONVIF output based on the predefined action in the intercom: ‘button press’, ‘motion/noise detection’, ‘door forced open’, etc. will trigger an alarm in XProtect® Smart Client.
Key features
- Live Video Stream - a video stream from the IP intercom displayed in XProtect® as another IP camera in the system.
- 2-way Audio - audio calls between operator and visitor directly via XProtect® Smart Client.
- Trigger Alarm - 2N IP Intercoms can trigger an alarm in the XProtect® Smart Client upon a predefined action like button press or call state changed.
- Output control – operator can control the intercom's outputs directly from XProtect® Smart Client to open doors and gates or switch on lights.
- Door control & monitoring – access events, door control, and monitoring is enabled with the 2N® Access Commander plugin for XProtect.
How it works
1 von 5
Check the 2N and Mileston integration in practice.
2 von 5
Monitor video from 2N IP intercoms together with other IP cameras. The operator can immediately see who is standing at the door and speak with the visitor.
3 von 5
Zoom in on the scene. Record video in case of an alarm. Access the recorded videos from the intercom.
4 von 5
Thanks to the ONVIF protocol, you can easily find the IP intercom on the network and select it in XProtect dashboard.
5 von 5
Learn how to set up both systems to work together.
How to install
Documentation
This is where you can find additional documentation
| Installation Guide - XProtect & 2N IP Intercoms | pdf Download (4,37 MB) |
| Integration Features Overview | pdf Download (862,10 KB) |
| Verification Document | pdf Download (54,08 KB) |
Von Milestone geprüft
Read verification
Installers
Here you can find more information about installers and installation guides
Specification
Required 2N Telekomunikace product(s)
Intercom Firmware 2.39 or higher
License: Gold for RTSP streaming and ONVIF
Has proven compatibility with the following Milestone versions:
-
XProtectExpress+2020 R3, 11.12 2020
-
XProtectCorporate2020 R3, 11.12 2020
-
XProtectExpert2020 R3, 11.12 2020
-
XProtectEssential+2020 R3, 11.12 2020
-
XProtectProfessional+2020 R3, 11.12 2020
Is also expected to work with:
-
XProtectExpress+2017 R2, 06.08 2017 und später
-
XProtectCorporate2016, 12.15 2015 und später
-
XProtectExpert2018 R1, 02.20 2018 und später
-
XProtectEssential+2018 R1, 02.20 2018 und später
-
XProtectProfessional+2018 R1, 02.20 2018 und später
Country availability
Your location is: Vereinigte Staaten von Amerika
-
AFRIKA
- Ägypten
- Marokko
- Mauritius
- Südafrika
- Tunesien
-
ASIATISCH-PAZIFISCHER
- China
- Hongkong
- Indien
- Japan
- Jordanien
- Kuwait
- Libanon
- Malaysia
- Philippinen
- Saudi Arabien
- Singapur
- Thailand
- Vereinigte Arabische Emirate
-
EUROPA
- Belgien
- Bulgarien
- Dänemark
- Deutschland
- Estland
- Finnland
- Frankreich
- Griechenland
- Irland
- Israel
- Italien
- Kroatien
- Lettland
- Litauen
- Luxemburg
- Malta
- Monaco
- Montenegro
- Niederlande
- Norwegen
- Österreich
- Polen
- Portugal
- Rumänien
- Schweden
- Schweiz
- Serbien
- Slowakei
- Slowenien
- Spanien
- Tschechische Republik
- Türkei
- Ukraine
- Ungarn
- Vereinigtes Königreich
-
NORDAMERIKA
- Kanada
- Mexiko
- Vereinigte Staaten von Amerika
-
OZEANIEN
- Australien
- Neuseeland
-
SÜDAMERIKA
- Argentinien
- Brasilien
- Chile
- Ecuador
- Kolumbien
- Uruguay
Language versions available
Deutsch
Englisch
Französisch
Italienisch
Russisch
Spanisch
Tschechisch
Similar pages
View more (8)