Seguimos aprendiendo su idioma
Estamos trabajando para que todas las páginas de milestonesys.com estén disponibles en tantos idiomas como sea posible. Aun así, este proceso lleva tiempo. Muchas de nuestras funciones están en varios idiomas. Sin embargo, algunas páginas, como esta, aún no están disponibles en su idioma.
Muchas gracias por su comprensión.
2N IP Access Control Integration to XProtect®
Use a single intuitive interface for the video and access monitoring and control!
Actualizada el lunes, 30 de mayo de 2022
2N has developed the 2N® Access Commander Plugin to integrate the 2N IP access control and intercom system with XProtect® Access system. The plugin lets you view access events and cardholder information, tigger door locks and monitor alarms directly in XProtect®.
What is needed
Desde 2N Telekomunikace
-
2N® Access Commander
-
2N® Access Commander Plugin for XProtect
2N® Access Commander (version 2.0 and newer)
2N® Access Commander Plugin for XProtect (version 1.5)
2N® Access Commander Plugin for XProtect (version 1.5)
Desde Milestone Systems
-
Milestone Access
-
Milestone XProtect
XProtect® Access control module version 2020 or newer (XProtect Enterprise, Professional, Corporate, Express, Expert)
License for Milestone XProtect including access control door
License for Milestone XProtect including access control door
Overview
How it works
How to install
Overview
2N IP Access Control Integration to XProtect® - Use a single intuitive interface for the video and access monitoring and control!
2N offers an IP-based access solution consisting of 2N® Access Commander, edge multi-technology readers, and intercoms. The combination of video and access control improves situational awareness and the overall security of a building.HOW CAN YOU BENEFIT FROM THE INTEGRATION?
2N has developed a plugin enabling the integration of the 2N® Access Commander control system with the XProtect® Access system. The plugin sends access events, door states, and cardholder information (e.g. card ID, PIN, License plates, mobile credential) directly to the Milestone XProtect Access. The XProtect® users can control and monitor doors directly from graphical maps in XProtect®. If an alarm occurs (door open too long, door forced open, tamper alarm), the operator is instantly notified by icon signaling. He can check the camera stream near the location and take appropriate action. The access events are linked to video recordings which makes retrieving relevant footage from the past quick and easy.
Key features
- Door control - You can control door switches and command different actions like unlock, lockdown or door hold open.
- Real time event logging - see all access logs like users details, photos and card IDs from 2N® Access Commander directly in Milestone.
- Mulitple access credentials supported - mobile credentials, RFID, PIN, finger print and license plate.
- Integration with maps – enjoy a visual representation of 2N controlled doors. You may see door state changes represented by a change in icon.
- Link events from the access control system with video footage or other actions in Xprotect .
How it works
1 de 7
Access events, door states and cardholder information are displayed in XProtect Smart Client.
2 de 7
If an alarm occurs, the operator is able to quickly identify the persons present at the location.
3 de 7
All access events are linked to the recordings what makes retrieving of relevant footage fast and easy.
4 de 7
Monitor doors controlled by 2N intercoms and readers
5 de 7
Icon signalization representing alarms ( door forced open, door open too long or lost connection) or door states.
6 de 7
Control device´s switches directly from the maps.
7 de 7
2N IP Verso - Milestone XProtect Integration Guide
How to install
Documentation
This is where you can find additional documentation
| Integration Manual: 2N Access Commander Plugin | pdf Download (171,77 KB) |
| 2N & Milestone Integration features overview | pdf Download (862,10 KB) |
| Verification Report | pdf Download (109,16 KB) |
Verificada por Milestone
Read verification
Installers
Here you can find more information about installers and installation guides
Specification
Required 2N Telekomunikace product(s)
• 2N® Access Commander (version 2.0.2 and higher)
• 2N® Access Commander Plugin (version 1.5)
Has proven compatibility with the following Milestone versions:
-
XProtectExpress+2020 R3, 11/12 2020
-
XProtectCorporate2020 R3, 11/12 2020
-
XProtectExpert2020 R3, 11/12 2020
-
XProtectEssential+2020 R3, 11/12 2020
-
XProtectProfessional+2020 R3, 11/12 2020
Is also expected to work with:
-
XProtectExpress+2020 R1, 02/11 2020 y posteriores
-
XProtectCorporate2020 R1, 02/11 2020 y posteriores
-
XProtectExpert2020 R1, 02/11 2020 y posteriores
-
XProtectEssential+2020 R1, 02/11 2020 y posteriores
-
XProtectProfessional+2020 R1, 02/11 2020 y posteriores
Country availability
Your location is: Estados Unidos
-
ÁFRICA
- Mauricio
- Sudáfrica
-
ASIA-PACÍFICO
- Arabia Saudí
- China
- Emiratos Árabes Unidos
- Japón
- Líbano
- Singapur
- Tailandia
-
EUROPA
- Alemania
- Austria
- Bélgica
- Croacia
- Dinamarca
- Eslovaquia
- Eslovenia
- España
- Estonia
- Finlandia
- Francia
- Grecia
- Hungría
- Israel
- Italia
- Letonia
- Lituania
- Noruega
- Países Bajos
- Polonia
- Portugal
- Reino Unido
- República Checa
- Rumanía
- Serbia
- Suecia
- Suiza
- Turquía
- Ucrania
-
NORTEAMÉRICA
- Canadá
- Estados Unidos
- México
-
OCEANÍA
- Australia
- Nueva Zelanda
-
SUDAMÉRICA
- Argentina
- Brasil
- Chile
- Colombia
- Uruguay
Language versions available
Alemán
Español
Francés
Inglés
Italiano
Ruso
Similar pages
View more (8)