Set system monitor thresholds

1. In the Site Navigation pane, select System Monitor Thresholds.
2. Select the Enable check box for the relevant system hardware if you have not already enabled it. The figure below shows an example.

   

3. Drag the threshold control slider up or down to increase or decrease the threshold value. There are two sliders available for each piece of system hardware shown in the threshold control, separating the Normal, Warning, and Critical levels.
4. Enter a value for the calculation interval or keep the default value.
5. If you want to set values on individual pieces of hardware, click Advanced.
6. If you want to specify rules for certain events or within specific time intervals, click Create rule.
7. Once you have set the relevant thresholds levels and calculation intervals, select File > Save from the menu.

Example of a threshold setting:

• Red indicates you have reached a Critical state
• Yellow is a Warning state indicating that you are close to reaching the Critical state
• Green indicates that things are at a normal state and within your selected threshold values.

© 2018 Milestone Systems A/S