Address

IP address (example: 123.123.123.123) or host name (example: ourserver) of the management server to which the recording server should be connected. This information is necessary so that the recording server can communicate with the management server.

Port

Port number to be used when communicating with the management server. Default is port 9993. You can change this if you need to.

Web server port

Port number to be used for handling web server requests, for example for handling PTZ camera control commands and for browse and live requests from XProtect Smart Client. Default is port 7563. You can this if you need to.

Alert server port

Port number to be used when the recording server listens for TCP information (some devices use TCP for sending event messages). Default is port 5432. You can change this if you need to.

SMTP server port

Port number to be used when the recording server listens for Simple Mail Transfer Protocol (SMTP) information. SMTP is a standard for sending e-mail messages between servers. Some devices use SMTP for sending event messages or images to the surveillance system server via e-mail. Default is port 25, which you can enable and disable. You can change the port number if you need to.