XProtect™ Enterprise shares the drivers with XProtect™ Professional and XProtect Basis+, offering compatibility with IP camera, encoder, input/output and DVR devices from the world's leading manufacturers. This list grows all the time. Below is an exhaustive list of devices and firmware versions supported by the latest version of XProtect™ Enterprise. Devices and firmware versions in bold are new in the latest Video Device Driver pack.
Number of supported manufacturers: 49.
Number of supported cameras: 454 (plus various devices in series and non-listet OEM devices).
| ACTi |
 |
| Device Name | Tested Firmware | Video Codec | Channels | Audio | I/O ports | PTZ Support | PTZ Joystick |
ACD-2100
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
ACD-2200
Show details | V2.02.07, V2.03.01, V2.03.06 | MPEG4
| 4 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
ACD-2300
Show details | V2.03.06 | MPEG4
| 8 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
ACD-2400
Show details | V2.03.06 | MPEG4
| 16 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
ACM-1100 Series
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-1230 series
Show details | V2.03.01 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-1310 Series
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-1430 Series
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-3100 Series
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-3210 Series
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-3300 Series
Show details | V3.03.07, V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-3400 series
Show details | V2.03.01, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-4100 Series
Show details | V3.05.05, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-4200
Show details | 2.03.01, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-5600 series
Show details | V2.03.01, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-5711
Show details | V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-7400 series
Show details | V2.03.01, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-8100 series
Show details | V2.03.01, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
ACM-8200 series
Show details | V2.03.01, V3.08.08 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5100H
Show details | V1.02.02, V1.05.01 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5100M
Show details | V1.02.02, V1.05.01 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5100S
Show details | V1.02.02, V1.05.01 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5120
Show details | V1.02.02, V1.05.01 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5130
Show details | V1.12.00 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5140
Show details | V1.12.00 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5150
Show details | V1.12.00 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5200 Series
Show details | V2.02.05, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5220 Series
Show details | V2.02.05, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5300 Series
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5320 Series
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5500
Show details | V2.05.01, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-5520
Show details | V2.05.01, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-6100
Show details | V1.03.06, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P(6100) must be used on this camera. |
CAM-6110
Show details | V1.02.02, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P(6100) must be used on this camera. |
CAM-6120
Show details | V1.03.06, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P(6100) must be used on this camera. |
CAM-6200
Show details | V1.03.06,, V1.04.01, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P or Pelco-D must be used on this camera. |
CAM-6210
Show details | V1.03.06, V1.04.01, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P or Pelco-D must be used on this camera. |
CAM-6220
Show details | V1.03.06, V1.04.01, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P or Pelco-D must be used on this camera. |
CAM-6230
Show details | V1.03.06, V1.04.01, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *PTZ protocol Pelco-P or Pelco-D must be used on this camera. |
CAM-6500
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-6510
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-6520
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-6600
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-6610
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-6620
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-6630
Show details | V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
CAM-7100 Series
Show details | V2.00.06, V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-7200 Series
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
CAM-7300 Series
Show details | V2.03.02, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Camera | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
SED-2100R
Show details | V1.02.02, V1.04.17, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2100S
Show details | V1.02.02, V1.04.17, V1.05.01 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2120 / 2120T
Show details | V2.02.05, V2.05.12, V2.06.12, V2.08.11 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2130
Show details | V2.03.02, V2.05.12, V2.08.11 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2140
Show details | V2.03.02, V2.08.11 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2200
Show details | V1.03.06 | MPEG4
| 1 | No | 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2300Q
Show details | V1.03.02, V1.04.02, V1.05.02 | MPEG4
| 1 | No | 0/0 | No | No |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Only one channel or quad view channel can be monitored at the same time |
SED-2310Q
Show details | V2.00.03, V2.01.03 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Only one channel or quad view channel can be monitored at the same time |
SED-2320Q
Show details | V2.00.03, V2.01.03 | MPEG4
| 1 | One-way
| 0/0 | No | No |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Only one channel or quad view channel can be monitored at the same time |
SED-2400
Show details | V2.02.05, V2.05.12, V2.06.12 | MPEG4
| 1 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2410
Show details | V2.02.06 | MPEG4
| 2 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2420
Show details | V2.02.06, V2.02.09 | MPEG4
| 2 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2600
Show details | V2.02.01, V2.02.07, V2.03.06 | MPEG4
| 8 | No | 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
SED-2610
Show details | v2.02.01, V2.02.07, V2.03.06 | MPEG4
| 8 | One-way
| 0/0 | Yes | Yes |
Device type:
Encoder | Account used in device:
Admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 3
|
| *Support for relative positioning analog PTZ cameras using Pelco-P, Pelco-D or Dynacolour protocol, and support for absolute positioning analog PTZ camera using Dynacolour protocol. |
| Advantech |
 |
| Device Name | Tested Firmware | Video Codec | Channels | Audio | I/O ports | PTZ Support | PTZ Joystick |
Adam 6050
Show details | 1.27 | -
| 0 | No | 12/6 | No | No |
Device type:
Input/Output | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
Poll | PTZ preset type:
None |
| *Require a DLK like other devices |
Adam 6060
Show details | 1.21 | -
| 0 | No | 6/6 | No | No |
Device type:
Input/Output | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
Poll | PTZ preset type:
None |
| *Require a DLK like other devices |
Adam 6066
Show details | 1.04 | -
| 0 | No | 6/6 | No | No |
Device type:
Input/Output | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
Poll | PTZ preset type:
None |
| *Require a DLK like other devices |
| Agilemesh |
 |
| Device Name | Tested Firmware | Video Codec | Channels | Audio | I/O ports | PTZ Support | PTZ Joystick |
100
Show details | NO-2.3.1b.4M-M | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
admin | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| Appro |
 |
| Device Name | Tested Firmware | Video Codec | Channels | Audio | I/O ports | PTZ Support | PTZ Joystick |
LC-7224 series
Show details | 1.23, 1.31 | MPEG4
JPEG
| 1 | One-way
| 0/0 | Yes | No |
Device type:
Camera | Account used in device:
admin | Multi-stream:
None | Supported camera events:
VMD | Input type:
None | PTZ preset type:
Type 3
|
| *Not supported in a NAT network |
LC-7226 series
Show details | 1.23, 1.31 | MPEG4
JPEG
| 1 | One-way
| 0/0 | Yes | No |
Device type:
Camera | Account used in device:
admin | Multi-stream:
None | Supported camera events:
VMD | Input type:
None | PTZ preset type:
Type 3
|
| Arecont |
 |
| Device Name | Tested Firmware | Video Codec | Channels | Audio | I/O ports | PTZ Support | PTZ Joystick |
AV1300
Show details | 62309, 62704, 63005, 64116 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
AV1305
Show details | 64216 | JPEG
H264
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Please contact Milestone Support to have the latest updated driver for this camera |
AV2100
Show details | 62309, 62704, 63005, 64116 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
AV2105
Show details | 64216 | JPEG
H264
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Please contact Milestone Support to have the latest updated driver for this camera |
AV3100
Show details | 62309, 62704, 63005, 64116 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
AV3105
Show details | 64216 | JPEG
H264
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Please contact Milestone Support to have the latest updated driver for this camera |
AV3130
Show details | 62328, 62704, 63005, 64116 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
AV5100
Show details | 62309, 62704, 63005, 64116 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
AV5105
Show details | 64216 | JPEG
H264
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *Please contact Milestone Support to have the latest updated driver for this camera |
AV8180
Show details | 62913 | JPEG
| 4 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *In a XProtect Enterprise system 1 camera license will cover all 4 channels. Older firmware is no longer supported. |
AV8360
Show details | 62913 | JPEG
| 4 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
| *In a XProtect Enterprise system 1 camera license will cover all 4 channels. Older firmware is no longer supported. |
| Axis |
 |
| Device Name | Tested Firmware | Video Codec | Channels | Audio | I/O ports | PTZ Support | PTZ Joystick |
200+
Show details | 1.42 | JPEG
| 1 | No | 1/0 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
FTP | PTZ preset type:
None |
205
Show details | 4.01, 4.03, 4.05 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
206
Show details | 4.10, 4.11, 4.20, 4.40.1 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
206M
Show details | 4.10, 4.11, 4.20, 4.40.1 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
206W
Show details | 4.10, 4.11, 4.20, 4.40 | JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
None |
207
Show details | 4.22, 4.40 | MPEG4
JPEG
| 1 | No | 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (B) requires 4.40 or newer. |
207MW
Show details | 4.40 | MPEG4
JPEG
| 1 | One-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot | Input type:
Alert Port | PTZ preset type:
None |
| *Audio support requires firmware 4.40 or newer. Axis Special Events (A,B) requires 4.40 or newer. |
207W
Show details | 4.33, 4.40 | MPEG4
JPEG
| 1 | One-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot | Input type:
Alert Port | PTZ preset type:
None |
| *Audio support requires firmware 4.40 or newer. Axis Special Events (A,B) requires 4.40 or newer. |
209FD
Show details | 4.43 | MPEG4
JPEG
| 1 | No | 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Tamper, Temperature | Input type:
None | PTZ preset type:
None |
| *Axis Special Events (B,Ta,Te) requires 4.43 or newer. |
209MFD
Show details | 4.43 | MPEG4
JPEG
| 1 | No | 0/0 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Tamper, Temperature | Input type:
None | PTZ preset type:
None |
| *Axis Special Events (B,Ta,Te) requires 4.45 or newer. |
210
Show details | 4.01, 4.02, 4.11, 4.20, 4.30, 4.40 | MPEG4
JPEG
| 1 | No | 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD | Input type:
Alert Port | PTZ preset type:
None |
| *MPEG4 support requires firmware version 4.20 or newer. Axis Special Events (B) requires 4.40 or newer. |
2100
Show details | 2.32, 2.33, 2.34, 2.40, 2.43 | JPEG
| 1 | No | 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
FTP | PTZ preset type:
None |
| *Audio via Axis 2191 Audio Module |
210A
Show details | 4.30, 4.40 | MPEG4
JPEG
| 1 | Two-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (A,B) requires 4.40 or newer. |
211
Show details | 4.02, 4.11, 4.20, 4.30, 4.40 | MPEG4
JPEG
| 1 | No | 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot | Input type:
Alert Port | PTZ preset type:
None |
| *MPEG4 support requires firmware version 4.20 or higher. Axis Special Events (B) requires 4.40 or newer. |
2110
Show details | 2.32, 2.33, 2.34, 2.40, 2.43 | JPEG
| 1 | One-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
FTP | PTZ preset type:
None |
| *Audio via Axis 2191 Audio Module |
211A
Show details | 4.13, 4.30, 4.40 | MPEG4
JPEG
| 1 | Two-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (A,B) requires 4.40 or newer. |
211M
Show details | 4.40 | MPEG4
JPEG
| 1 | Two-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
| Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot | Input type:
None | PTZ preset type:
None |
| *Axis Special Events (A,B) requires 4.40 or newer. |
211W
Show details | 4.40 | MPEG4
JPEG
| 1 | Two-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (A,B) requires 4.40 or newer. |
212
Show details | 4.34, 4.40 | MPEG4
JPEG
| 1 | One-way
| 1/1 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Axis Special Events (A,B) requires 4.40 or newer. |
2120
Show details | 2.32, 2.33, 2.34, 2.40, 2.43 | JPEG
| 1 | One-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
FTP | PTZ preset type:
None |
| *Audio via Axis 2191 Audio Module |
213
Show details | 4.02, 4.03, 4.12, 4.30, 4.35 | MPEG4
JPEG
| 1 | Two-way
| 2/3 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *MPEG4 support requires firmware version 4.20 or higher. Axis Special Events (B) requires 4.35 or newer. |
2130
Show details | 2.32, 2.34, 2.40, 2.43 | JPEG
| 1 | No | 0/0 | Yes | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
Type 2
|
214
Show details | 4.32, 4.40 | MPEG4
JPEG
| 1 | Two-way
| 1/1 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot, Temperature | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Axis Special Events (A,B,Te) requires 4.40 or newer. |
215
Show details | 4.40 | MPEG4
JPEG
| 1 | Two-way
| 1/1 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot, Temperature | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Axis Special Events (A,B,Te) requires 4.40 or newer. |
216FD
Show details | 4.32, 4.34, 4.40, 4.47 | MPEG4
JPEG
| 1 | One-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot, Tamper | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (A,B) requires 4.40 or newer. Axis Special Events (Ta) requires 4.47 or newer. |
216MFD
Show details | 4.40, 4.47 | MPEG4
JPEG
| 1 | One-way
| 1/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot, Tamper | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (A,B) requires 4.40 or newer. |
221
Show details | 4.15, 4.20, 4.30, 4.45 | MPEG4
JPEG
| 1 | No | 2/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Tamper, Temperature | Input type:
Alert Port | PTZ preset type:
None |
| *MPEG4 support requires firmware version 4.20 or higher. Axis Special Events (B,Ta,Te) requires 4.45 or newer. |
223M
Show details | 4.40, 4.45 | MPEG4
JPEG
| 1 | One-way
| 2/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Audio, Boot, Tamper, Temperature | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (A,B,Ta,Te) requires 4.45 or newer. |
225FD
Show details | 4.31, 4.45 | MPEG4
JPEG
| 1 | No | 2/1 | No | No |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Tamper, Temperature | Input type:
Alert Port | PTZ preset type:
None |
| *Axis Special Events (B,Ta,Te) requires 4.45 or newer. |
231D
Show details | 4.02, 4.20, 4.30, 4.40 | MPEG4
JPEG
| 1 | No | 4/4 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Temperature | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *MPEG4 support requires firmware version 4.20 or higher. Axis Special Events (B,Te) requires 4.40 or newer. |
231D+
Show details | 4.35, 4.40 | MPEG4
JPEG
| 1 | No | 4/4 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Temperature | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Axis Special Events (B,Te) requires 4.40 or newer. |
232D
Show details | 4.02, 4.20, 4.30, 4.40 | MPEG4
JPEG
| 1 | No | 4/4 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Temperature | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *MPEG4 support requires firmware version 4.20 or higher. Axis Special Events (B,Te) requires 4.40 or newer. |
232D+
Show details | 4.35, 4.40 | MPEG4
JPEG
| 1 | No | 4/4 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD, Boot, Temperature | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Axis Special Events (B,Te) requires 4.40 or newer. |
233D
Show details | 4.40, 4.42 | MPEG4
JPEG
| 1 | Two-way
| 4/4 | Yes | Yes |
Device type:
Camera | Account used in device:
root | Multi-stream:
None | Supported camera events:
Pre-alarm, VMD | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Axis Special Events (A,B,Te) requires 4.42 or newer. |
240
Show details | 1.13 | JPEG
| 4 | No | 0/0 | Yes | No |
Device type:
Encoder | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
None | PTZ preset type:
Type 1
|
2400 Linux
Show details | 2.32, 2.33, 2.34 | JPEG
| 4 | One-way
| 4/1 | Yes | Yes |
Device type:
Encoder | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Audio via Axis 2191 Audio Module |
2400 Osys
Show details | 1.12, 1.15 | JPEG
| 4 | No | 4/1 | Yes | No |
Device type:
Encoder | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
Alert Port | PTZ preset type:
Type 1
|
2400+
Show details | 3.01, 3.02, 3.10, 3.11 | JPEG
| 4 | One-way
| 4/1 | Yes | Yes |
Device type:
Encoder | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Audio via Axis 2191 Audio Module. Resolutions 176x112/176x144 not supported |
2401 Linux
Show details | 2.32, 2.33, 2.34 | JPEG
| 1 | No | 4/1 | Yes | Yes |
Device type:
Encoder | Account used in device:
root | Multi-stream:
None | Supported camera events:
None | Input type:
Alert Port | PTZ preset type:
Type 1
Type 2
|
| *Audio via Axis 2191 Audio Module |
